Lab-Line Laboratory Alumaloy Clamps
from Barnstead International
Discontinued
Barnstead/Lab-Line General Purpose Clamps Attach support rods in a variety of configurations.
Right Angle Clamps
- Attaches rods at right angles up to 3/4” diameter.
- Adjust using two 45°angle thumb screws.
- Die Cast nickel-plated zinc alloy.
90° Connector for Rod Ends
- Connects 1/2” rods at 90° angle end to end.
- Adjust by tightening square head screws with a wrench or screwdrivers.
- Die Cast nickel-plated zinc alloy.
Swivel Clamp
- Rotates 360° to connect 1/2” rods at any relative angle.
- Adjust using two thumbscrews.
- Die Cast nickel-plated zinc alloy.
Hook Connector
- Attaches 1/2” rods at 90° angles.
- Adjust using a single thumb screw.
- Die Cast nickel-plated zinc alloy.
End-to-End Rod Connector
- Connects two 1/2” rods end to end.
- Tighten with two set screws.
- Constructed from corrosion resistant aluminum alloy.
Barnstead|Lab-Line Special Purpose Clamps
Chain Clamps
- Hold beakers and bottles from 3-6” OD.
- Movable slide and non-slip knob hold object firmly in place.
Thermometer Clamps for water bath
- Securely attaches to water bath walls between 1/8” to 3/16”.
- Holds thermometers between 3/16” and 3/8” diameter.
- Use thumbscrew to attach to the water bath.
- Use wingnut to hold the thermometer 3-1/2” from bath.
Tri-Grip Clamps for water baths
- Securely attaches to water bath walls between 1/8” and 3/16”.
- Jaw capacity 1” diameter controlled by two independent thumbscrews.
- Includes vinyl sleeves.
Double Burette Holder
- Holds two burettes up to 100ml size.
- Arm is 6” long and 1/2” diameter.
- Holder does not obscure graduation lines and numbers.
- Easily attached to support rod.
Double Burette Holder with stand
- Include the double burette holder 7086AQ with the 7057AQ stand.
Thermometer Clamp for support rods
- Attaches to 1/2” support rod with thumb screw.
- Holds thermometers 1/4” to 1/2” diameter.
- Thermometer is held 3-7/8” from support rod.
Barnstead Tri-Grip Clamps
- Two thumb screw adjustment provides a precise grip.
- Optional clamp holders attach the tri-grip to the stand.
- Variable distance of the clamp from the stand.
- Both fiberglass and vinyl sleeves are included.
Barnstead|Lab-Line Ring Clamps
- Sturdy design includes integrated set screw clamp.
- Cast iron construction for added durability.
- Large 5/8” set screw locks tightly to support stands.
- Perfect choice for cylindrical glassware.
Barnstead|Lab-Line Stand
- Large 1/2 “ x 11” base for outstanding stability.
- Base is constructed from a solid Epoxy resin-excellent chemical compatibility.
Lab-Line tri-grip clamp, large with holder, 10-1/2 inch length Thermo Fisher Sci Inc |
Lab-Line double burette holder Thermo Fisher Sci Inc |
Lab-Line tri-grip clamp, small, 8-3/4 inch length Thermo Fisher Sci Inc |
Lab-Line end-to-end rod connector Thermo Fisher Sci Inc |
Lab-Line right angle clamp Thermo Fisher Sci Inc |