Electrothermal Heating Cords / Tapes
from Bibby Scientific
Discontinued
HT & HC Series for surface heating
- The HT and HC series of Heating Tapes and Cords are a range of flexible resistance heater elements for use in a wide range of commercial/industrial surface heating applications.
- Once the Heating Tape /Cord has been installed around the item to be kept at an elevated temperature, it is recommended that it is connected to one of Electrothermal’s MC controllers.
HC1 Glass fibre cords.
- HC1 Glass Fibre Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.
- HC1 Glass Fibre Cords have an element wound on a glass fibre core and covered in braided glass fibre outer sheath.
- They are available in different lengths to accommodate a broad range of temperatures up to 450°C.
- As with all the tapes and cords, the use of an energy or temperature controller is recommended.
Key Features.
- For high wattage applications.
- Operational temperature range up to 450ºC.
- Cord is spiralled around the tube being heated to give a surface loading power concentration up to 4W/cm².
- Linear loading: 195W/m (60W/ft).
- Available in different lengths from 1 foot (30.5cm) to 32 feet (976cm).
- Insulated unheated flexible lead at each end (122cm).
- Approximate outside diameter of 5mm.
- All models have dual voltage choice of 115V and 230V (except for the HC106 model which is available as 230V only).
- For use in dry conditions only.
- Use of MC227 Single output controller, MC228 2-Way output controller or MC810B Digital controller is recommended.
HC5 Quartz fibre cords.
- HC5 Quartz Fibre Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.
- HC5 Quartz Fibre Cords have a high temperature wire heating element wound on a quartz fibre core which is covered in a braided quartz fibre outer sheath.
- They are available in different lengths to accommodate a broad range of temperatures up to 800°C.
- As with all the tapes and cords, the use of an energy or temperature controller is recommended.
Key Features.
- For high temperature, high wattage applications.
- Operational temperature range up to 800ºC.
- Cord is spiralled around the tube being heated to give a surface loading power concentration up to 6.5W/cm².
- Linear loading: 328W/m (100W/ft).
- Available in different lengths from 1 foot (30.5cm) to 16 feet (488cm).
- Insulated unheated flexible lead at each end (61cm).
- Approximate outside diameter of 5mm.
- All models have dual voltage choice of 115V and 230V (except for the HC505 model which is available as 230V only).
- For use in dry conditions only.
- Use of MC227 Single output controller, MC228 2-Way output controller or MC810B Digital controller is recommended.