BriskHeat Centipede Temperature Control Systems
from BriskHeat Corp.
Discontinued
- Recommended Substitute: BriskHeat* Centipede 2 Din-Rail STACK Temperature Control Systems
- Recommended Substitute: BriskHeat* Centipede 2 PID Control Module Temperature Control Systems
- Recommended Substitute: BriskHeat* Centipede 2 Touch Screen Interface Temperature Control Systems
Platinum RTD sensor.
Product Description
- Compact 2" (51mm) PID-autotuned temperature controller.
- Network up to 40 modules together with CAT5 communication cable.
- Monitor and program modules with operator interface or use stand-alone with module power supply.
- Available factory pre-set upon request.
Product Specifications
- PID-autotuned control. Receives set-point through communication link and stored in nonvolatile memory (retains settings if power is interupted).
- Automatically assigned zone addresses.
- Temperature sensor: RTD platinum 100 ohm, DIN 385 curve, class B.
- Sensor accuracy: ±0.55°F (0.30°C).
- Temperature control range: 32° to 662°F (0° to 350°C).
- Dimensions: 2" x 2" x 1" (51mm x 51mm x 25mm).
- Weight: 0.13lb (59g).
- Dual color LED: red and green. Red indicates fault.
- Input power: 12-24 volts DC, 0.04A max supplied through CAT5 communication cable.
- Output relay: solid state, 277VAC max, 50-60hz, 4.5A max.
- Module communication: Modbus through CAT5 communication cable.
- Maximum CAT5 communication cable length: 500ft (152m).
- Environmental temperature: 32° to 122°F (0° to 50°C) at 3.5A [100°F (38°C) maximum at 4.5A].
- Storage exposure temperature range: 0° to 185°F (-18° to 85°C).
- Ambient humidity: 5 to 95% (non condensing).