Barnstead LabTower RO Reverse Osmosis Systems
from Thermo Fisher Scientific
06.5003 06.5204 09.4003 22.0046 22.0087 50132390 50132391 50132392 50132714 50134022 50138221 AY1137X1 CMX25
Thermo Scientific Barnstead LabTower RO water purification system delivers RO water from an integrated system.
- The Barnstead LabTower RO converts tap water into RO water with integrated 100L storage.
Advanced technology in a mobile design.
- An ultra-modern microprocessor control provides easy-to-read system parameters.
- Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component.
- Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory.
- Ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use.
- A built-in pretreatment unit, consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers, and an activated carbon/5µm combi-cartridge protects the system against free chlorine and particles, ensures the long service life of downstream purification stages.
Compact and mobile design.
- Two system options with permeate flows of 20 or 40L/hr.
- Stand-alone design with integrated 100L tank takes up ZERO bench space-casters allow for easy relocation.
- Systems can be upgraded later to accommodate growing water capacity demands.
Integrated 100L reservoir.
- 100L RO water storage in a high-purity polyethylene PE opaque reservoir.
- Adjustable reservoir volume can be programmed for times of low demand-dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.
Easy-to-operate clear display.
- Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
- Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” or “disinfection” modes.
- Reservoir fill-level shown as %.
- System parameters are code-protected to prevent accidental changes to set points.
GLP-compliant documentation.
- LabTower RO has been developed to fulfill GLP requirements.
- Recorded and traceable data can be obtained by print out via the RS-232 interface and accessory printer.
- Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm-1.
