LabStrong Water Replacement Parts

from LabStrong Corp.

06808LS 25001LS 410671LS 740880LS 740883LS BC0017-2 CMX25LS D00122 FL0012-2 FL0016-1 FL1265X1LS GS-006 LMP01 LMP13 LMP31 PU1190X1LS

Lower cost alternative.

06808LS.

• Suggested Replacement for the Thermo Scientific Barnstead* 06808 and 06808-DB.
• Compatible with: Barnstead o-ring canister gasket.
• The o-ring is designed for use in the Thermo Scientific Barnstead NANOpure II water purification system cartridge canister housings (PCS style).
• The economical and reliable canister o-ring provides outstanding quality.
• The LabStrong NANOpure II Quad Style Canister O-Ring is designed to seal the space between the cartridge canister housing and the head section of the water purification system.
• The o-ring is designed to prevent leakage between these connections.
• Overtime, the canister o-rings in the Thermo Scientific Barnstead NANOpure II water purification systems wear and eventually fail.
• When the o-ring fails, the water purification systems can leak water.
• To prevent this from occurring, LabStrong recommends changing the o-rings when the cartridges in these water purification systems are replaced.
• When replacing the o-ring, place the o-ring flat in the recess located between the cartridge canister housing and the head section of the water purification system.

25001LS.

• Suggested Replacement for the Thermo Scientific Barnstead* 25001 and 25001-DB Ventgard* Filter.
• Compatible with: Barnstead water purification system storage reservoirs.
• The LabStrong Ventguard Filter protects pure water during storage by preventing airborne impurities such as organic vapors, carbon dioxide, alkali and acid gases from entering the water storage reservoir.
• The product effectively filters dust and particles as small as 0.2µm from the air.
• Under normal operating conditions, the filter will last up to 90 days or until 1,000 gallons of water have been drawn from the storage reservoir.
• Each filter is individually sealed in a plastic bag to extend the shelf life.
• The filter provides outstanding quality at a significantly lower cost than the competitor's.

410671LS.

• Suggested Replacement for the Thermo Scientific Barnstead* 410671.
• Compatible with: Barnstead replacement gaskets.
• The gaskets are designed for use in the Thermo Scientific Barnstead Mega-Pure Single (D1) and Dual (D2) Cartridge Deionizer Systems and the MP-12A Glass Stills.
• The economical and reliable gaskets provide outstanding quality.
• The LabStrong Mega-Pure Gaskets are designed to seal the space between the cartridge and the cartridge holder of the water purification system.
• The rubber gasket is designed to prevent leakage between these connections.
• Overtime, the gaskets in the Thermo Scientific Barnstead Mega-Pure Single (D1) and Dual (D2) Cartridge Deionizer Systems and the MP-12A Glass Stills wear and eventually fail.
• When the gaskets fail, the water purification systems can leak water.
• To prevent this from occurring, LabStrong recommends changing the gaskets when the cartridges in these water purification systems are replaced.
• When replacing the gaskets, place the gaskets flat in the upper and lower recesses in the cartridge holder.

740883LS.

• Suggested Replacement for the Thermo Scientific Barnstead 740883 and 740895 replacement heating elements.
• Compatible with: Barnstead* Mega-Pure* Glass Stills.
• The 240V 2500w heating element is suitable for operation in the MP-3A (Model numbers A440367 and A440696), MP-6A (Model numbers A440518 and A440697), MP-11A (Model numbers A440118 and A440117) and MP-12A (Model numbers A442011 and A442012) Thermo Scientific Barnstead Mega-Pure Glass Stills.
• The heating element converts electricity into heat through the process of Joule heating.
• Electric current through the element encounters resistance, resulting in heating of the element.
• The heating of the element causes the water in the boiler of the glass still to boil.
• This heating allows for the process of distillation to occur.
• The heating element provides outstanding quality at a lower cost than the competitor’s.

CMX25LS.

• Suggested Replacement for the Thermo Scientific Barnstead* CMX25 Cleaning Syringe.
• Compatible with: EASYpure* II LF, EASYpure UV, EASYpure UV/UF, NANOpure* Infinity and NANOpure DIamond* water purification systems.
• The syringe contains a cleaning solution specifically formulated to sanitize and flush away bacterial contaminants in Thermo Scientific Barnstead water purification systems.
• The LabStrong cleaning syringe provides outstanding quality at an economical price.
• Thermo Scientific Barnstead recommends using a cleaning syringe to sanitize their water purification systems when the system is new or when installing new cartridge packs.
• The cleaning solution minimizes the risk of bacterial contamination in Thermo Scientific Barnstead water purification systems.
• The syringe features a clear barrel with bold scale markings, tapered plunger rod for ease of aspiration, and positive plunger rod stop.
• The syringe has an added Luer-Lok* thread for increased secure connection.

D00122.

• The Fi-Streem Puri-Fi D00122 water pretreatment cartridge is a highly convenient disposable cartridge (no restrictor) that offers user a means of purifying water to suit individual needs.
• Pressure resistant cartridge is suitable for in-line applications.
• Installed in moments, it is easily replaced when exhausted.
• Cartridge contains high quality ion exchange resin.
• Water purity is indicated by resin color change at two windows in the cartridges casing.
• Will produce water quality as high as 0.1uS cm conductivity.
• Maximum Flow Rate: 60 liters per hour.
• Contains high quality ion exchange resin.
• Water purity indicated by resin color change at two windows in casing.
• Will produce water quality as high as 0.1uS cm conductivity.
• Lower cost alternative, disposable, and ideal for in-line applications.
• Optional wall mount system available (AY0012-2).
• Two year shelf life.

FL0012-2.

• The Fi-Streem Puri-Fi Pretreatment Particulate Filter is an economical particulate filter designed for water pretreatment.
• The particulate filter contains wound fiber to remove particulate matter from feedwater supplies.
• The particulate filter is capable of removal down to 50 micron.
• Lower cost alternative, disposable, and contains wound fiber.
• Operating Inlet Pressure: 75 maximum.
• Maximum Flow Rate: 15 liters per hour.
• Flow Direction: Up.
• Maximum Temperature: 40 degrees Celsius.

FL0016-1.

• Suggested Replacement for the Thermo Scientific Barnstead* D3750 Final Filter.
• The LabStrong 0.2 micron (µm) Final Filter is designed for use in ultrapure water purification systems.
• Compatible with: Barnstead B-Pure*, E-Pure*, all NANOpure* systems (including DIamond*), AccuDIspense*, EASYpure*, all EASYpure II systems, EASYpure RoDi and DIamond TII water purification systems.
• The final filter is able to remove particulates down to 0.2 µm to provide bacteria-free water.
• The final filter is constructed of hollow fiber material and does not contain any wetting agents or surfactants.
• Each irritated filter is individually bagged and sterilized by Electron Beam (E-Beam).
• An endbell and cover are included with the filter to prevent contamination of hose barb when not in use.

FL1265X1LS.

• Product Type: Encapsulated Reverse Osmosis Membrane for Water Purification Systems.
• Suggested Replacement for the Thermo Scientific Barnstead* FL1265X1 RO membrane.
• Compatible with: Barnstead* DIamond* RO and DIamond TII water purification systems.
• The LabStrong Encapsulated RO Membrane has a thin microporous surface that rejects impurities, but allows water to pass through.
• The LabStrong Encapsulated RO membrane is rated at 75 gallons per day (GPD).
• The RO membrane rejects 90% to 95% of inorganic solids, monovalent ions and polyvalent ions from feed source.
• Polyvalent ions are rejected easier than monovalent ions.
• Organic solids with a molecular weight greater than 300 are rejected by the membrane, but dissolved gases are not as effectively removed.
• Reverse osmosis is a percent rejection technology.
• The purity of the product water depends on the purity of the inlet water.
• The purity of the reverse osmosis product water is typically 95% higher than the purity of the feed water.
• Certification: NSF Certified Components.
• Maximum Pressure: 90 PSI (6.2 bar).
• Maximum Temperature: 120 degrees Fahrenheit.
• Connection Size: ¼ inch (Quick Connect Design).
• Connections: Green (Feed Water), Blue (Product Water), Yellow (Brine).
• Construction: Polypropylene.
• Characteristics: Rejects bacteria and pyrogens from feed source.

LMP01.

• Product Type: Replacement UV Lamp for Water Purification Systems.
• Suggested Replacement for the Thermo Scientific Barnstead* LMX13 UV Lamp.
• The lamp is effective at germicidal and total organic carbon (TOC) reduction in water through the use of 185 and 254 nanometer (nm) UV wavelengths.
• The LabStrong 185/254 nm UV Lamp is suitable for operation in the Thermo Scientific Barnstead DIamond* TII and NANOpure* DIamond (with new style ballast) water purification systems.
• The lamp filament has been design has been sized and tested specifically for matched operation with the higher powered Barnstead TN1403X1 Ballast (3 x 2 x 1.5 inches).
• The lamp’s quartz glass includes an extended life coating to minimize mercury migration into the quartz.
• The rated average life of the lamps at six starts per day is approximately 9,000 hours.
• For maximum product performance, LabStrong recommends replacing the lamp at this time, as the 185/254 UV wavelength output intensity will be diminished.
• To extend lamp life, LabStrong also recommends limiting the number of times the lamp is started per day to six times per day.
• Compatible with: Barnstead DIamond TII and newer NANOpure DIamond Water Purification Systems.
• Light Wavelengths: 185 nm light (generates hydroxyl free radicals by cleavage of the water molecules and is used to decompose organic molecules into carbon dioxide and water) and 254 nm light (germicidal light able to destroy microorganisms).
• Power: 14 to 17 watts.
• Current: Approximately 425 milliampere (mA).
• UV Output: 40uW/cm ² at 254 nm.
• UVC Watts: 4 (at 100 hours) at 1 meter.
• Characteristics: Performs both germicidal and TOC reduction in water purification systems.
• CAUTION: As with ALL UV Lamps, protect eyes and skin from the rays of an illuminated lamp.

LMP13.

• Product Type: Replacement UV Lamp for Water Purification Systems.
• Suggested Replacement for the Thermo Scientific Barnstead* LMX13 UV Lamp.
• Compatible with: Barnstead NANOpure Quad, Infinity, EASYpure*, EASYpure II (RF/UV, UV and UV/UF), EASYpure RoDi, older NANOpure DIamond* and DIamond TII Water Purification Systems.
• The lamp is effective at germicidal and total organic carbon (TOC) reduction in water through the use of 185 and 254 nanometer (nm) UV wavelengths.
• The LabStrong 185/254 nm UV Lamp is suitable for operation in the Thermo Scientific Barnstead NANOpure Quad, Infinity, EASYpure*, EASYpure II (RF/UV, UV and UV/UF), EASYpure RoDi, older NANOpure DIamond* and DIamond TII water purification systems.
• The lamp filament has been design has been sized and tested specifically for matched operation with the lower powered Barnstead SC1191X1 Ballast (3 x 2 x 1.5 inches).
• The lamp’s quartz glass includes an extended life coating to minimize mercury migration into the quartz.
• The rated average life of the lamps at six starts per day is approximately 9,000 hours. For maximum product performance, LabStrong recommends replacing the lamp at this time, as the 185/254 UV wavelength output intensity will be diminished.
• To extend lamp life, LabStrong also recommends limiting the number of times the lamp is started per day to six times per day.
• Light Wavelengths: 185 nm light (generates hydroxyl free radicals by cleavage of the water molecules and is used to decompose organic molecules into carbon dioxide and water) and 254 nm light (germicidal light able to destroy microorganisms).
• Power: 8 to 10 watts.
• Current: Approximately 250 milliampere (mA).
• UV Output: 24uW/cm ² at 254 nm.
• UVC Watts: 2 (at 100 hours) at 1 meter.
• Characteristics: Performs both germicidal and TOC reduction in water purification systems.
• *CAUTION: As with ALL UV Lamps, protect eyes and skin from the rays of an illuminated lamp.

PU1190X1LS.

• Product Type: Replacement Diaphragm Pump for Water Purification Systems.
• Suggested Replacement for the Thermo Scientific Barnstead* PU1190X1 diaphragm pump.
• The diaphragm pump can be used with Thermo Scientific Barnstead* NANOpure* Infinity Retrofit Kit (PU896X3) and NANOpure DIamond* water purification systems.
• The diaphragm pump is also used with the distribution Boost Pump (AY1268X1).
• The diaphragm pump provides outstanding quality at a lower cost than the competitor’s.
• The function of the recirculation diaphragm pump in the Thermo Scientific Barnstead NANOpure water purification systems is to recirculate purified water during inactivity.
• The recirculation process helps to ensure water purity and allows for on-demand use of water.
• When the diaphragm pump is used as a distribution Boost Pump, it helps to compensate for longer tubing runs and for water storage reservoirs above the level of a NANOpure water purification system or feed source.
• The high-quality pump provides optimal flow rates, constant pressure, and quiet operation.
• Flow: .635 liters per minute at 50 PSI.
• By-PassSetting: 80 PSI.
• Pressure Switch: 65 to 70 PSI.
• Input Voltage: 12 to 24 VDC.
• Amps: 1.12 A at 80 PSI at 12 VDC.
• Wire Color: Red wire is positive and black wire is negative.
• Duty Rating: Continuous Duty.
• Media Use: Water (Diaphragm pump can be ran dry without damage).
• Pressure Switch: Contains both N.C. and N.O. connections.
• Characteristics: Recirculates water in water purification systems and distribution.