Lindberg / Blue M 1200°C Top Loading Crucible Furnaces
from Thermo Fisher Scientific
1200°C Crucible furnaces are ideal for use in ceramics, electronics, glass, metallurgy and superconductor materials research.
- These models require independent controllers (ordered separately).
Features
- Requires independent controller (ordered separately).
- Unitized heating and insulation element with helical wire coil embedded in Moldatherm insulation for maximum heat transfer to the work load.
- Cover plug with Moldatherm insulation and handle for safe removal.
- Moldatherm insulation protects vestibule, improves energy efficiency.
- Platinel II thermocouple with 10' compensated lead wire and polarized plug for long life and accurate temperature measurement.
- Moldatherm ceramic fiber hearthplate supports load and protects furnace from spillage.
Applications
- Melting.
- Annealing.
- Heat Treating.
1200°C Digital, Single Setpoint Controller
- Control console includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack.
- Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint.
- Built-in adjustable high limit overtemperature protection.
- Simultaneous LED display of actual temperature vs. setpoint.
- May be configured to display temperature in either °C or °F.
1200°C Digital Single Program, Multiple Segment Programmable Controller
- Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack.
- Includes microprocessor-based PID control (proportional, integral, derivative), single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control.
- Built-in adjustable high limit overtemperature protection.
- Simultaneous LED display of actual temperature vs. setpoint.
- May be configured to display temperature in either °C or °F.
Option B Overtemperature Control (OTC)
- Adjustable digital overtemperature control, factory installed on selected control consoles with “B” suffix designation.
- Protects furnace and load in the event of primary control circuit failure.
- Overrides main controller and shuts off power to furnace if high limit is reached.
- Manual re-set required for safety.
- Operates via magnetic contacts through signal from independent thermocouple.
Optional RS485 Digital Communications Port
- RS485 Digital communications port available as an option.
- Allows controller to be connected to a PC for remote monitoring and control of the furnace.
- Up to 30 units can be connected to one PC.