VACUUBRAND PC3001 Basic Vacuum Systems
from BrandTech Scientific, Inc.
The VACUUBRAND PC3001 Basic is an upgradeable chemistry-design vacuum system.
- It includes our MD1C vacuum pump, with a motor speed control knob to provide approximate vacuum levels.
- This provides some of the advantages of VARIO motor speed control, specifically the reduced noise, wear, and energy consumption at a reduced cost compared with a full VARIO version.
- The PC3001 Basic also has the advantage that it can be upgraded, either partially or fully to our popular PC3001 VARIO vacuum system.
The PC3001 Basic:
- Features a MD1C vacuum pump with a 1.5Torr (2mbar) ultimate vacuum, and a maximum flow rate of 25lpm (0.88cfm), mounted on a space saving stand.
- A dial controls the speed of the pump motor to allow setting of approximate vacuum levels by matching pumping speed to vapor flow.
- An integrated gas ballast allows the continuous purging of condensate from the pump for superior performance.
Supplemental Module I:
- The addition of this module to the PC3001 Basic adds a CVC3000 vacuum controller to provide all of the VARIO control functions.
- Specifically, with the addition of this module, the system will be able find and follow boiling point curves, have single-point hysteresis-free vacuum, have up to ten user programs, interface with a computer via a bi-directional RS232 serial port, plug-and-play installation of peripheral valves via VACUU•BUS, and more.
- All functions are controlled with a large graphic display and the use of a “turn-and-push” jogwheel.
- An inlet catchpot is also included to preserve the performance of the pump from vacuum line condensate.
Note:
- The PC3001 Basic can only be upgraded to full VARIO performance with the purchase of Supplemental Module I.
- A standard CVC3000 controller will not interface with the pump.
Supplemental Module II:
- The addition of this module to the PC3001 Basic adds an exhaust condenser and catchpot to allow the capture of solvent that passes through the pump.
- Condenser catchpot capacity is 500mL.
Ordering Information:
- PC3001 Basic is supplied complete with appropriate power cord, manual, and one-year manufacturer’s warranty.
- Supplemental Module I is supplied complete with special CVC3000 controller and inlet catchpot assembly and all parts required for installation to the PC3001 Basic.
- Supplemental Module II is supplied complete with exhaust condenser, catchpot, and all parts required for installation to the PC3001 Basic.