BriskHeat ACR MiniPro Hot Bonders
from BriskHeat Corp.
Easiest-to-Use Hot Bonder Under 18 lbs (8kg).
- Fully-Loaded.
- HD Color Touch Screen.
- USB Data Port.
- Small and lightweight: cure composite materials anywhere.
- Easy-to-carry and setup: even up towers, ladders, staircases, and on wings.
Perform Cures Faster and Better.
- Single zone.
- 8.4” (213mm) full-color touch screen.
- Built-in vacuum venturi.
- Universal voltage: 100-130VAC, 200-240VAC.
- 20 amps output.
- 10 thermocouple sensors.
- Accepts J-type thermocouples.
- Includes everything you need.
- Includes training DVD.
Easy-to-Use Software on Full-Color HD Touchscreen.
- Quick 3-step programming: Store 30 programs on hot bonder.
- Easy-to-follow menu choices.
- Quick data entry: Complete QWERTY keyboard interface.
- Secure: Multiple levels of password protection.
- Multi-task: Perform several operations at once.
- Retains history of last 12 cures.
- Customized post cure analysis: Data logging intervals 1 to 99 minutes.
- Multiple language support.
Fast and Simple Data Transfer with USB Drive.
- USB Flash Disk Included.
- Transfer and archive post cure data history to your PC.
- Instantaneously analyze your data on your spreadsheet and word processor programs including Microsoft Excel and Word.
- Transfer your programs quickly from one BriskHeat bonder to another.
- Update your bonder easily with the latest FREE software at www.briskheat.com.
Specifications: General.
- Single zone.
- 8.4” (213mm) touch screen.
- USB port for data transfer (USB flash disk included).
- Input ground fault interrupter breaker protected.
- Audible and visual alarms for high and low temperature / vacuum limits.
- Data logs digitally.
Specifications: Power.
- Universal input voltage: 100-130VAC, 200-240VAC.
- MAINS supply voltage fluctuations up to ±10% of the nominal voltage.
- Transient over voltages typically found on a Category II power source: i.e. a lighting circuit.
- Frequency: 50-60Hz.
- 20 amps capacity.
Specifications: Vacuum.
- Built-in vacuum venturi pump.
- Pressure: 28 in Hg (13.8PSI).
Specifications: Temperature Control
- Cures up to 1400°F (760°C).
- 10 thermocouple sensor inputs.
- Accepts J-type thermocouple connectors.
- Accuracy: ±3°F (1.67°C).
- Monitors all thermocouples for alarms.
Specifications: Environment.
- Intended for use in dry environments. Do not expose to a wet spray.
- Altitude up to 6562ft (2,000m).
- Storage temperature range: -4 to 140°F (-20 to 60°C).
- Operating temperature range: 41 to 104°F (5 to 40°C).
- Maximum relative humidity: 80% for temperatures up to 88ºF (31ºC) decreasing linearly to 50% relative to humidity at 104ºF (40ºC).
- Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected).
ACR MiniPro Hot Bonde: Kit Includes.
- ACR MiniPRO hot bonder unit.
- One 10ft (3m) vacuum hose.
- One vacuum bag feed-through.
- One 10ft (3m) input power cord.
- One 5ft (1.5m) heater output power cord.
- USB flash disk.
- Ten J-Type thermocouples.
- Ten standard connector adapters for thermocouple receptacles.