BriskHeat Aircraft Non-Destructive Testing (NDT) Kits

from BriskHeat Corp.

BriskHeat* Aircraft NDT Non-Destructive Testing Kits from BriskHeat Corp. 300BLANKETKIT 320BLANKETKIT 340BLANKETKIT NDTCONTROLLER

Perform Moisture Intrusion Testing on Elevators and Other Aircraft Components.

Product Highlights.

  • The portable and easy heating solution for moisture intrusion testing on elevators and other aircraft components.
  • Method B in Airbus Non-Destructive Elevator Test Manual 55-20-07, 55-20-08, 55-20-11 : A300-600 | A320 | A330/340.
  • Your aircraft not listed? We can develop a solution for you.
  • Simple-to-operate pre-programmed temperature controller.
  • Dual 110/220 volt design
  • No transformer required.
  • Heating blankets designed for the shape of your aircraft.
  • Durable parallel-wired heating elements.
  • Two-year warranty.

Other Features.

  • Single plug-n-play connector from the blanket to the controller containing all power and sensor wiring.
  • Testing data is easily saved to a USB flashdrive (included).
  • Easy to handle, wheeled transport and storage case.
  • Heater blanket strain relief is built through the entire edge of the blanket for increased durability.
  • Includes six 9” (229mm) non-slip holding clamps.

Temperature Controller.

  • Universal voltage 100-240 VAC.
  • Dual zone will control one individual heater, or two heaters in tandem.
  • Automatic and independent temperature control per heater.
  • Preset locked ramp/soak (slope) temperature.
  • Accuracy ± 1°C (1.8°F).
  • End of cycle audible alarm.
  • Auto shut-down of heater power at end of cycle.
  • Differential ground fault (earth leakage) breakers.
  • Ground connection to elevator.
  • Visual or audible alarms for: ground fault, temperature limits, and thermocouple failure.
  • 13-minute dwell countdown timer.
  • Additional independent 10-minute test cycle timer, manually triggered.
  • Simultaneous reading of both heater blanket thermocouples.
  • Cycle will not start if process temperature is above 60°C.
  • High temperature process shutdown and alarm at 90°C.
  • USB port for post cycle data transfer to flashdrive (USB flash disk included).
  • Two-year warranty.
  • CE.
  • Transport container.

Heating Blankets.

  • Sized to fityour specificaircraft elevator.
  • No seams; all flexibleheating blankets are of a one-piece construction.
  • Dual voltage blankets; 110 or 220 volt.
  • Power density: 1400 watts/m 2 (0.9 watts/in 2 ).
  • Two J-type thermocouples built into each blanket (1 primary, 1 spare).
  • All power and sensor wires in a single connector (plug-n-play).
  • Heater blanket is very flexibleand durable.
  • Two-year warranty.
  • CE.
  • Easy-to-transport storage containers included.

PRODUCT TECHNICAL DATA SHEET

Sort By: