BriskHeat SRV Composite Curing Blankets with Vacuum Seal
from BriskHeat Corp
Product Highlights.
- Both a heater and a reusable vacuum bag.
- Two year warranty.
- Highly flexible.
- Quick, efficient, non-stress producing heat up to 450ºF (232ºC).
- Used on horizontal and vertical surfaces and on complex contoured surfaces without removing the damaged section.
- Compatible with BriskHeat hot bonder and your current equipment.
- CE.
Specifications.
- Vacuum ports built into blanket eliminates the need for vacuum bagging materials.
- Blanket seal added around edge eliminates the need for tacky / sealant tape.
- Flexibility.
- + With blanket seal: 3" (76mm) radii.
- + Without blanket seal: 1/4" (6mm) radii.
- Smooth surface against repair.
- Heating element laminated between two layers of non-reinforced silicone rubber, 66 mil thick with a density of 66 oz/ydÂ2 (2237 grams/mÂ2).
- 450ºF (232ºC) maximum exposure temperature.
- Power density of 5 watts / inÂ2 (0.008 watts/mmÂ2).
- Dielectric strength of over 2000 volts.
- Moisture, chemical, and radiation resistant.
- Strain relief built through entire edge of blanket for increased durability.
- Power cord 6 feet (1.8m) long with choice of power plug.
Applications.
- Cool-Touch Insulation Pad.
- Different Shapes / Sizes.
- High Limit Devices.
- Other Power Densities.
- Other Power Plugs.
- Thermocouples Built-in.
Ordering Information:
- Standard Sizes and Wattage.
- Rectangular & Round.
- See plug choices below : B / C / D / E / F / G / H / K - PLUG
- Remove blanket seal for added flexibility: "S" at end of part number.
- IMPORTANT: Temperature controller is required for this product.
- BriskHeat recommends the ACR 3 or MiniPro Hot Bonder.
- BriskHeat Composite Heat Curing Blankets can be configured-to-order.