Talboys Overhead Mixer Accessories

from Troemner, LLC.

Talboys Overhead Mixer Accessories from Troemner, LLC. 110B 112 115 150 150L 150LT 150T 150XL 150XLT 151 151L 151LT 151T 151XL 151XLT 152 152A 152L 152LT 152T 152XL 152XLT 152XXL 152XXLT 153A 153B 154 154A 154L 154LT 154T 154XL 154XLT 154XXL 154XXLT 155 155L 155XL 156 156L 156XL 157 157L 157XL 160 160L 160LT 160T 160XL 160XLT 161 161L 161LT 161T 161XL 161XLT 162 162L 162LT 162S 162SL 162SLT 162ST 162T 162XL 162XLT 165 165L 165XL 166 166L 166XL 167 167L 167XL 170 171 172 180 180A 180L 180XL 180XXL 180XXXL 181 181A 181L 181XL 181XXL 181XXXL 182 182A 182L 182XL 182XXL 182XXXL 191C 191D 191L 192 193 199A 199B 199C 987406 987407 987408 987409 987410 987411 987412 987420 987421 987422 987423 987424 987425 987426 987427 987428 987429 987430 987431 987432 987433

Adjustable Chuck.

  • Should be ordered based on the diameter of the motror shaft you are using.
  • Each adjustable Jacobs style chuck can accomodate accessory shafts from 1/16" to 3/8" diameter.
  • These products include a chuck key.

Adjusta-Speed Control.

  • Excellent upgrade for units with no speed control.
  • Solid state, electronic, voltage control varies speed steplessly over the motor's range.
  • Ideal for use with models 105, 103X, 104X, and 107.

Beater Paddles.

  • Designed for high torque, heavy-duty mixers.
  • Paddle design inhibits incorporation of air, making it suitable for stirring shampoos and other foaming liquids.
  • Constructed of stainless steel and available with PTFE coating.
  • Creates radial flow. Small paddle blade is 4.5L x 3W" (114.3 x 76.2mm), large paddle blade is 5.5L x 4W" (139.7 x 101.6mm).

Chain Paddles.

  • An efficient option for mixing the contents of narrow-necked containers.
  • Fits openings as small as 5/8" (15.9mm).
  • Blends suspensions and mixes both low and high viscosity liquids.
  • Constructed entirely of stainless steel.
  • Shafts vary in diameter and length.
  • Swing diameter of chain is approximately 3" (76mm).

Coil Impellers.

  • Constructed of stainless steel and designed for durability.
  • Creates radial flow.
  • The rotating coils force the solution outward from the coil, creating a vacuum that pulls the particles through the coil, effectivey reducing and dispersing the sample.
  • Ideal for dissolving powders.
  • - Bow-Tie Coils: Ideal for lower viscosity fluids.
  • - Straight Coils: Ideal for higher viscosity materials and larger solids.

Collet Chuck.

  • Stainless steel precision collet type chuck is used when the motor shaft and accessory shaft are the same diameter.
  • It is true running and is the preferred choice when running at high speeds.

Extension Sleeves.

  • Comprised of precision bored stainless steel tubing.
  • Mixing paddles are joined to shafts of the same diameter to increase the paddle length.
  • You can connect the mixing paddle directly to the motor shaft by using the extension sleeve in place of a chuck.

Glass Rod Chuck.

  • Holds glass mixing rods.
  • It eliminates wobbling and vibration problems associated with glass mixing rods.
  • This chuck accepts 1/4", 5/16", or 3/8" diameter motor shafts.
  • It is equipped with nylon inserts needed for 0.24", 0.31" and 0.39" diameter mixing rods.

Heavy-Duty Holder.

  • For mounting stirrers and other apparatus.
  • Holder is constructed of strong aluminum alloy; fitted with oversized knobs for very secure positioning.
  • Rods supported on 102mm (4") long surface to avoid vibration and wobble.

High Speed Dispersion Blades.

  • Designed for high speed dispersion.
  • These blades tear particles apart and disperse them uniformly throughout the sample.
  • Constructed of stainless steel with welded bushing and a set screw for mounting on mixer shafts.

Mixing Shafts.

  • Made of stainless steel.
  • Can add propeller blades to these shafts to customize a propeller shaft.
  • Increase agitation with multiple blades on one shaft.

Propeller Blades.

  • Made of stainless steel.
  • You can customize the propeller to the shaft of your choice.
  • Several blades can be attached for increased agitation.
  • Creates axial flow.
  • Blades come on a bushing with a stainless steel hex-head screw and Allen key for attaching to mixing shafts.

Propeller Shafts.

  • All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow.
  • Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available.
  • PTFE coating available.

Solid Glass Mixer Paddles.

  • Ideal for very sensitive samples.
  • Constructed of chemical-resistant borosilicate glass that has been precision ground and polished.
  • Creates radial flow.
  • Requires Glass Rod Chuck to attach to mixer.

Standard Support Holder.

  • Has a strong stainless steel construction.
  • It is equipped with oversized, easy to grip knobs for precise tightening.
  • It also accommodates 1/2" (12.7mm) diameter shaft of a motor mounting rod and 5/8" (16mm) diameter support stand rod.

Swivel Blade Paddles.

  • Mixes the contents of narrow-mouthed vessels.
  • Creates radial flow. Constructed of durable stainless steel.
  • Swivel blade is attached to the shaft.
  • The blade measures 2W x 0.5H" (51 x 13mm).

U-Shaped Paddles.

  • Designed for high viscosity materials or large batch mixing.
  • Constructed of stainless steel and available with PTFE coating.
  • Creates radial flow.
  • Recommended for high torque, heavy-duty mixers.
  • Paddle blade is 4.5L x 4.5W" (114 x 114mm).

Zig-Zag Paddles.

  • Constructed of stainless steel and designed for durability.
  • The zig-zag shape of this rod promotes mixing of heavy fluids like paints, pastes, and creams.
  • Available in different shaft diameters and lengths.
  • Also available with PTFE coating.

PRODUCT TECHNICAL DATA SHEET

Sort By: