Talboys Lab-Frames

from Troemner, LLC.

Talboys Lab-Frames from Troemner, LLC. 916173 916174 916175 916176 916178 916193 916194 916195 916196 916197 916198 916199 916200 916201 916202

Nickel-plated zinc connectors and lab-frame feet are standard with all kits.

  • Talboys offers the widest choice of standard lab frames available, plus the accessories to custom-fit any laboratory with the right frame for the job.
  • Standard Lab-Frame sets are available in five sizes.
  • Options of traditional center-less ground aluminum, non-corroding fiberglass, or tough stainless steel rods are available.

(A) Small Lab-Frame.

  • Vertical mounting, great for glassware set-ups in small laboratories or where space is limited.
  • Frame measures 24 x 24" (610 x 610mm).
  • Base is 18" (457mm) wide for stability.
  • Base may be permanently mounted to bench top with screws (included).
  • Components:
  • -(8) 2" (51mm) rods.
  • -(2) 18" (457mm) rods.
  • -(8) 24" (610mm) rods.
  • -(18) S-Connectors.
  • -(4) Rod End Connectors.
  • -(4) Lab-Frame Feet.

(B) Medium Lab-Frame.

  • Horizontal or vertical mounting, convenient for distillation or general set-up.
  • Frame measures 24 x 48" (610 x 1219mm).
  • Base is 18" (457mm) wide for stability.
  • Components:
  • -(8) 2" (51mm) rods.
  • -(2) 18" (457mm) rods.
  • -(7) 24" (610mm) rods.
  • -(4) 48" (1219mm) rods.
  • -(35) S-Connectors.
  • -(4) Rod End Connectors.
  • -(4) Lab-Frame Feet.

(C) Large Lab-Frame.

  • This 48 x 48" (1219 x 1219mm) frame is ideal for complex glassware set-ups.
  • Base is 18" (457mm) wide for stability.
  • Components:
  • -(10) 2" (51mm) rods.
  • -(3) 18" (457mm) rods.
  • -(2) 36" (914mm) rods.
  • -(10) 48" (1219mm) rods.
  • -(38) S-Connectors.
  • -(4) Rod End Connectors.
  • -(6) Lab-Frame Feet.

(D) Extra-Large Lab-Frame.

  • Versatile, adaptable Extra-Large Lab-Frame measures 48 x 72" (1219 x 1829mm) and may be used either horizontally or vertically.
  • Components:
  • -(6) 2" (51mm) rods.
  • -(6) 12" (305mm) rods.
  • -(2) 24" (610mm) rods.
  • -(7) 48" (1219mm) rods.
  • -(5) 72" (1829mm) rods.
  • -(45) S-Connectors.
  • -(4) Rod End Connectors.
  • -(8) Lab-Frame Feet.

(E) Heavy-Duty Lab-Frame.

  • Floor mounted, free-standing unit is specifically designed for heavy-duty work such as pilot plant set-ups.
  • Outside frame is constructed of a strong, but lightweight steel channel.
  • Interior lattice uses a horizontal channel connector; one end accommodates the rod, the other end fits into the channel and locks tightly with a bolt.
  • Loosen the bolt, and the connector slides easily along the channel track for simple lattice adjustment.
  • Entire apparatus is supported on sturdy, counter-weighted cast iron feet, which may be bolted to the floor for added stability required in top-heavy installations.
  • Components:
  • -(5) 48" (1219mm) rods.
  • -(3) 72" (1829mm) rods.
  • -(15) S-Connectors.
  • -(16) Channel Connectors.
  • -(24) Clamping Nuts.
  • -(2) 21.7" (551mm) Cast Iron Feet.
  • -(1) Frame Kit.
  • -(1) Wrench.

PRODUCT TECHNICAL DATA SHEET

Sort By: