Talboys Multi-Purpose Clamps

from Troemner, LLC.

Talboys Multi-Purpose Clamps from Troemner, LLC. 916066 916067 916068 916069 916070 916073 916075 916076 916077 916078 916081 916365 916366 916369 916373

(A) Double Jaw Utility Clamps.

  • Swivels 360° and locks securely in desired position.
  • These 2-prong clamps have a medium and a large clamp on each end. Nickel-plated zinc construction.
  • Supplied with non-slip vinyl sleeves and, for temperatures above 100°C, fiberglass covers.
  • Note: Replacement vinyl and fiberglass sleeves are available.

(B) Fixed-Position Clamps.

  • Used to hold apparatus near the lab-frame where no adjustment is required after set-up.
  • Built-in holder grips rods up to 19mm (0.75") in diameter Fixed-Position Clamps have an integral holder but can be rotated after attachment to a lab-frame or other apparatus.
  • Available in 2-prong or 3-prong.
  • Stainless steel electro-polished finish or nickel-plated zinc construction.
  • Supplied with non-slip vinyl sleeves and, for temperatures above 100°C, fiberglass covers.
  • Note: Replacement vinyl and fiberglass sleeves are available.

(C) Swivel Clamps.

  • Used to hold apparatus near the lab-frame. Unlike extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus.
  • Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws.
  • Shaft wing-nut allows the holding angle of the swivel clamp to adjust through 360° of rotation and can be locked in place once desired position is achieved.
  • Stainless steel electro-polished finish or nickel-plated zinc construction.
  • Supplied with non-slip vinyl sleeves and, for temperatures above 100°C, fiberglass covers.
  • Note: Replacement vinyl and fiberglass sleeves are available.

(D) Thermometer Swivel Clamps.

  • Holds glass tubes and thermometers 114mm (4.49") from support rod.
  • Clamp features safety adjust spring plate jaws that adjust to any angle with locking wing-nut.
  • Built-in holder grips rods up to 19mm (0.75") in diameter.
  • Lightweight, rust, and corrosion-resistant.
  • Nickel-plated construction.

(E) Thermometer / Thermocouple Extension Clamps.

  • Lightweight clamp holds glass tubing, thermometers or thermocouples up to 178mm (7") from support rod.
  • Tightening wing-nut applies tension to the nickel-plated jaws.
  • Note: An additional holder must be purchased in order to attach clamps to frames or other apparatus.

(F) Wall Clamps.

  • Ideal for securing fermentation tubes, burets or other small objects to walls where no frames are available.
  • Integral self-tapping screw secures clamp to wall.
  • Nickel-plated construction.

(G) Water Bath Clamps.

  • Holds a variety of apparatus, including glass tubes and thermometers onto glass water bath walls.
  • Built-in holder grips walls of varying thickness, up to 9mm (0.35").
  • Knurled thumbscrew tightens jaws to hold objects firmly.
  • Nickel-plated zinc construction.
  • Large water bath clamp is supplied with non-slip vinyl sleeves and, for temperatures above 100°C, fiberglass covers.
  • Note: Replacement vinyl and fiberglass sleeves are available.

PRODUCT TECHNICAL DATA SHEET

Sort By: