Talboys Aluminum / Stainless Steel Lab-Lifts

from Troemner, LLC.

Talboys Aluminum / Stainless Steel Lab-Lifts from Troemner, LLC.960030 960054 960055 960056 960057 960058 960059 960060 960061 960080 960081 960082 960083

(A) Aluminum Lab-Lifts.

  • Exceptional stability and durability.
  • Three convenient sizes.
  • Aluminum Lab-Lifts provide stable height adjustment for various items in the lab such as flasks, baths, and small equipment.
  • Top and bottom decks are constructed of anodized aluminum.
  • Internal supports and drive screws are constructed of stainless steel.
  • Oversized sure-grip adjustment knobs provide smooth and accurate height adjustment.
  • Lab-Lifts accept optional Support Rod Kit which mounts to the upper deck.

(B) Optional 17" Support Rod Kit.

  • Ideal for creating an adjustable support stand for mounting various items such as thermometer clamps, temperature probes, flask and column clamps.
  • This kit allows you to mount a 17" (432mm) threaded vertical support rod to the upper deck of a 6 x 6", 8 x 8", or 10 x 10 Lab-Lift by screwing the rod into the pre-drilled hole.
  • -(1) 17" (432mm) Stainless Steel Rod.
  • -(1) Jam Nut.
  • -(1) Flat Washer.

NOTE:

  • Maximum load rating represents static weight only.
  • Static weight is the amount a unit can hold, not lift.

(C) Stainless Steel Lab-Lifts.

  • Seven convenient sizes to choose from.
  • Autoclavable and chemical resistant.
  • These Heavy-Duty, Stainless Steel Lab-Lifts are ultra-stable lifting platforms with exceptional strength and durability.
  • Constructed of stainless steel, Lab-Lifts are designed for use in extreme environments and high load applications.
  • Equipped with oversized, sure-grip adjustment knobs that provide extra leverage for easy height adjustments.
  • Durable construction allows lifts to be autoclaved or chemically cleaned.
  • Ideal for use in fume hoods or bench tops and holds a variety of items such as glassware, hotplates, baths, and magnetic stirrers.

(B) Optional 17" Support Rod Kit.

  • Ideal for creating an adjustable support stand for mounting various items such as thermometer clamps, temperature probes, flask and column clamps.
  • This kit allows you to mount a 17" (432mm) threaded vertical support rod to the upper deck of a 6 x 6", 8 x 8", 10 x 10", 12 x 12" or 16 x 16" Lab-Lift by screwing the rod into the pre-drilled hole.
  • -(1) 17" (432mm) Stainless Steel Rod.
  • -(1) Jam Nut.
  • -(1) Flat Washer.

(D) Optional Ratchet Tool.

  • Designed to add extra leverage to your 12 x 12" or 16 x 16" Lab-Lift.
  • This recommended Ratchet Tool easily attaches to the actuating rod to allow easy, accurate adjustments.

NOTE:

  • Maximum load rating represents static weight only. Static weight is the amount a unit can hold, not lift.

PRODUCT TECHNICAL DATA SHEET

Sort By: